GOV-BOARD

Gov-Board assemblies up to and including 6 lineal feet are shipped in one piece. Longer assemblies are shipped in two or more pieces or sub-assemblies, none of which exceeds 6 lineal feet.

Narrow trim lines (2-1/2" wide) allows unit to blend with any decor. This unit can take the place of the base molding and can be painted to match your walls.

The Gov-Board unit with its unique integral cast design offers high efficiency and maximum output. Your Guarantee of performance.

I=B=R Rating Data Notes

I=B=R Rating Data

Flow Rate	Steam Rate		*Water Ratings BTUH Per Linear Foot at Average Water Temp. Indicated
Lbs/Hr	Sq. Ft.	BTU/Hr at 215° F	170° F	180° F	190° F	200° F	210° F	220° F	230° F
500	3.15	750	490	550	610	680	740	800	870
2000	3.15	750	520	580	640	720	780	850	920

I=B=R Ratings are determined from test made in accordance with the I=B=R Testing and Rating Code for baseboard type radiation,
including an allowance of 15% for heating effect permitted by the code.
"Pressure drop Ratings are available for all sizes directly from Governale Company, Inc."

Notes

The Hot Water Ratings at 2000 lb. flow rate are limited to installations where the water flow rate through the GOV-BOARD is equal to or greater than 2000 lbs per hour (4 GPM)
Where the water flow rate through the GOV-BOARD is not know, the rating at the standard flow rate of 500 lbs. (1 GPM) per hour must be used.
Rating based on active length. Active length same as total length.
Maximum allowable working pressure - 30 PSI, Water: 15 PSI, steam.

back to top of page

Products |

Contact |

Commitment |

History |

|Home